Three Fat Quarter Child's Apron...

I think aprons are a wonderful gift for children. Now that we are getting closer to the holidays and holiday baking aprons come to mind for the wee ones in my life. So the other day while I was playing around with my fabric and came up with this Three Fat Quarter Apron. It's the perfect size and it's so quick!! So if you have wee ones in your life and I know you have a stash of fat quarters, whip one together! I know they'll love it!!

Here's what I did...

 

 

First you will need your 3 fat quarters, ruler, rotary cutter, Best Press and sewing supplies.

 

As always, press your fabric and square up your fat quarters. If you're not sure how to 'square up' see my past post here...

Once you have your fabric prepared, you're ready to place two fat quarter right sides together and mark off the front part of your 'bib'. For my toddler the width needed to be 6 inches for my 5 year old it was 8 1/2 inches. Be sure to measure your child to get an idea of width for the 'bib' area of the apron.

 

Next I marked my fabric for my cut lines for the 'bib'. Since I needed the bib to be approximately 6 inches wide, I measured 3 inches from the middle of the fabric. The best way is to fold your two fat quarters in half measure half the width you need from the fold and mark. On both children I discovered that whatever the width of the bib needed to be was about how far down the arm cutouts should be, so I measured 6 inches from the top of the fabric and then made an arch connecting the marks. I had to trace it in with my mouse since my pencil line was to light for the photo.

 

 

Then cut on your line to make the arm cut aways. Now from the cut aways you can make two double sided pockets. Like so..

 

 





 

Now that you have a cut square, sew your two pieces of fabric together making your pocket. Leave a whole in the bottom to flip out your pocket. Make two.

 

 

Next press and sew them to your apron fronts.

 

 

 

Set these aside for now and go on to make the ties for your apron. Out of your third fat quarter you will be cutting six 2 1/2 inch strips for the ties.

 

 

For two of the six strips you are going to press the strip in half, then press the sides into the center crease and then in half again. See photos...

 

 

 

 









Now you're going to take these two strips to the machine and sew down a 1/4 inch seam to make the neck ties. Remember to fold one end in before you stitch so you have a finish end.

With the other four strips you are going to sew them right sides together. I like to make the end a little nicer by making a point. For this I sewed a diagonal line from corner to edge of the strip and then cut off the corner. See photo...

 

Once you cut off your corner, you are ready to sew the 1/4 inch seam around your tie. Then use a chop stick or in my case my 'Purple Thang' and turn it out.

Now press and sew a 1/4 inch seam around your ties to finish them up.

At last we are ready to put it all together!! Pin your ties to the appropriate places in between your two apron fronts. See photo...

 

Next stitch the 'apron sandwich' together with a 1/4 inch seam, being careful to keep the ties out of your way!! Leave an opening at the bottom to flip it out. Then press and stitch another 1/4 inch seam to give your apron a more finished look and close the opening at the bottom and you are DONE!!

 

Now your cutie patootie will have a cute little apron made by you! Get ready to have your little helper assist you with your holiday baking!!

Happy stitching and may your bobbins always be full!

Pillowcases!

Once you've finished the long project of completing your quilt, have you ever wanted to make accessories to match? Pillowcases are a great way to compliment your project! I love to include my children in my sewing and a change of season is a great excuse to make a new pillowcase. For this 'Burrito Pillowcase' you'll need 3/4 yard of the main fabric and 1/3 yard for the cuff.

Step 1. Square up your fabric

Most people have been taught to square up your fabric by the salvage edge. However, the salvage can be off and your fabric will not lay nicely. Can you see the ripple in the photo?

 

However if you fold your fabric to create a straight edge and square up the sides your fabric will lay nicely and won't want to twist.

 

 





Step 2.  Layout

Once you get both of your fabrics squared up. You're ready to begin laying out your pillowcase. You'll want lay all your fabrics 'right' side up.

 

 

Step 3.  Roll

I pin both fabrics together in the middle of the panels and then pin going out in each direction. This will prevent the fabric from shifting. Then we begin to roll.

 

 

 

Step 4. Sew 'Burrito'

Once you get your 'burrito' rolled then pin all three layers together.

 

Once you get your pins in place, you are now ready to go to the machine.

 

 

 

Step 5. Pull out

After you've sewn your tube you'll be pulling out the main fabric from inside your 'burrito'.

 

 

Once it's all pulled through you'll need to press and pin your pillow case and begin your french seams.

 

Step 6. Sew wrong sides together

 

 

After pinning wrong sides together you will sew the raw edge and then turn the case inside out and sew that seam again. Creating your 'french seam'. 

 

 

 

Finished seam with wrong sides together...

 

Turn inside out and sew right sides together...

 

 

All done! Didn't they do a great job!!

 

Enjoy your day! And may your bobbins always be full!